BMW C400GT - Rider's Manual > Time and date
Set clock
Requirement
The Scooter is stationary.
- Switch on the ignition.
- Selecting SETUP.
SETUP CLOCK is displayed.
- Press and hold the bottom of the MENU rocker button to set the hours.
The hours 1 flash.
- Briefly press the top of the MENU rocker button to increase the hours setting.
- Briefly press the bottom of the MENU rocker button to decrease the hours setting.
- After the hours are set, press and hold the bottom of the MENU rocker
button.
The minutes 2 flash.
- Briefly press the top of the MENU rocker button to increase the minutes setting.
- Briefly press the bottom of the MENU rocker button to decrease the minutes setting.
- After the minutes are set, press and hold the bottom of the MENU rocker
button.
The minutes 2 no longer flash.
- Check the setting on the time display 3.
The clock is now set.
- Press and hold the top of the MENU rocker button.
SETUP ENTER is displayed.
Setting the date
Requirement
The Scooter is stationary.
- Switch on the ignition.
- Selecting SETUP.
SETUP DATE is displayed.
- Press and hold the bottom of the MENU rocker button.
Month 1 flashes.
- Briefly press the top of the MENU rocker button to increase the month setting.
- Briefly press the bottom of the MENU rocker button to decrease the month setting.
- After the month is set, press and hold the bottom of the MENU rocker
button.
Day 2 flashes.
- Briefly press the top of the MENU rocker button to increase the day setting.
- Briefly press the bottom of the MENU rocker button to decrease the day setting.
- After the day is set, press and hold the bottom of the MENU rocker
button.
Year 3 flashes.
- Briefly press the top of the MENU rocker button to increase the year setting.
- Briefly press the bottom of the MENU rocker button to decrease the year setting.
- After the year is set, press and hold the bottom of the MENU rocker
button.
Year 3 stops flashing.
The clock is now set.
- Press and hold the top of the MENU rocker button.
SETUP ENTER is displayed.
See also:
BMW C400GT - Rider's Manual > Calibrating ASC
Requirement Lower stability reserves of the ASC control after a tire change. NOTICE Calibration means that the control is adapted to the effective tire radii of the front and rear wheels.
BMW C400GT - Rider's Manual > General settings in the multifunction display
Adjusting the brightness of the backlighting for the instrument cluster Requirement The Scooter is stationary. Switch on the ignition. Selecting SETUP. Briefly press the top of the MENU rocker button repeatedly until SETUP BRIGHT is displayed. Briefly press the bottom of the MENU rocker button 2 repeatedly until the desired brightness of the backlighting is adjusted. Press and hold the top of the MENU rocker button 1 to exit SETUP.
