Kymco XCITING 500 - Service Manual > Floorboard
REMOVAL
Remove right and left center body cover.
Remove the right and left floor skirt.
Remove the luggage box.
Remove six bolts, four screws and floorboard.
INSTALLATION
Installation is in the reverse order of removal.
LICENCE LIGHT
REMOVAL
Remove two screws.
Disconnect the license light connector and remove the license light.
INSTALLATION
Installation is in the reverse order of removal.
REAR FENDER
REMOVAL
Remove the licence light.
Remove two screws.
Remove two nuts and rear fender.
INSTALLATION
Installation is in the reverse order of removal.
RIGHT/LEFT SIDE BODY COVER
REMOVAL
Remove the luggage box.
Remove the floorboard.
Remove the rear spoiler.
Remove two bolts.
Raise the side body cover, disconnect the taillight/rear turn signal light connector and remove the side body cover.
INSTALLATION
Installation is in the reverse order of removal
REAR BODY COVER
REMOVAL
Remove the luggage box.
Remove the rear spoiler.
Remove two screws and rear body cover.
Be careful not to damage the tabs on the rear body cover.
INSTALLATION
Installation is in the reverse order of removal.
See also:
Kymco XCITING 500 - Service Manual > Luggage box
REMOVAL Remove the seat. Remove the four screws and three nuts. Raise the luggage box, disconnect the luggage box light and accessory socket connectors.
Kymco XCITING 500 - Service Manual > Tailight/rear turn signal light
REMOVAL Remove the side and rear body cover. Remove eight screw and taillight/rear turn signal light. INSTALLATION Installation is in the reverse order of removal.
