BMW C400GT - Rider's Manual > Deactivating ASC
Requirement
The Scooter is stationary.
- Switch on the ignition.
- Selecting SETUP.
SETUP ASC is displayed.
- Briefly press the bottom of the MENU rocker button to change between ASC
ON 1 and ASC OFF.
SETUP ASC OFF is displayed.
ASC indicator and warning light
lights up.
ASC is switched off.
- Press and hold the top of the MENU rocker button to exit SETUP.
SETUP ENTER is displayed.
Deactivating ASC
- with Connectivity OE
Requirement
The Scooter is stationary.
- Switch on the ignition.
- Call up menu item Settings, Vehicle settings, ASC, Activate ASC.
- Switch off ASC.
ASC indicator and warning light
lights up.
- Press and hold the top of the MENU rocker button to exit Settings.
Pure is displayed.
Switch on ASC
Requirement
The Scooter is stationary.
- Switch on the ignition.
- Selecting SETUP.
SETUP ASC is displayed.
- Briefly press the bottom of the MENU rocker button to change between ASC ON and ASC OFF 1.
SETUP ASC ON is displayed.
The ASC indicator and warning
light stays out or flashes while self-diagnosis is still in progress.
ASC is switched on.
- Press and hold the top of the MENU rocker button to exit SETUP.
SETUP ENTER is displayed.
- Alternative: turn the ignition off and on again.
If the ASC indicator and warning light lights up after the ignition is switched off and on, an ASC error has occurred.
Switch on ASC
- with Connectivity OE
Requirement
The Scooter is stationary.
- Switch on the ignition.
- Call up menu item Settings, Vehicle settings, ASC, Activate ASC.
- Switch on ASC.
The ASC indicator and warning
light stays out or flashes while self-diagnosis is still in progress.
ASC is switched on.
- Press and hold the top of the MENU rocker button to exit Settings.
Pure is displayed.
See also:
BMW C400GT - Rider's Manual > Calibrating ASC
Requirement Lower stability reserves of the ASC control after a tire change. NOTICE Calibration means that the control is adapted to the effective tire radii of the front and rear wheels.
